Step 7: Program will ask to erase content of MCU because it is secured. Step 6: click NEXT- sometimes you need couple times try to have succesful connection. choose COM port that VCI is installed (check in device manager on your pc)
Step 5: On Flash Loader Demonstrator menu. and supply 12V power (OBD-ii diagnostic plug). Step 4: Connect Autocom / Delphi hardware with your pc via USB.
Step 3: install and run "Flash Loader Demonstrator" Notice: you can do that as on attached pictures (test point TP205 or TP206 connect with capacitor) but some of units have different PCB so you need to solder directly to the legs or find test points with multimeter. Step 2: Find MCU STM32 Big Grin on PCB, to enter MCU into Boot mode you need to connect legs 108 nad 138 together with some wire. Step 1: you need to open the case of Autocom / Delphi hardware and remove main board from case. Here OBD2Repair share with you Fix Autocom/Delphi Firmware Update Fail Error Instructions to help you update Autocom / delphi firmware version to 2012.02 or 2012.03 or 2013.01. VIP Order 2013 Autocom CDP with all connectors for cars trucks Some customers try update the Autocom/Delphi Firmware themselves, then they meet problem-Autocom/Delphi Firmware update Fail Error. While the autocom/delphi update very soon, 2012.02, 2012.03, even 2013.01 autocom/delphi is in sell now. Many customers have autocom/delphi firmware 2011.03 or 2012.01 version. Fix Autocom/Delphi Firmware Update Fail Error Instructions